EPOXY 151 - RESIN FLOORING SYSTEM |
EPOXY 151 is a 100% solids epoxy flooring system utilizing
the most current epoxy resin technology. The resin rich,
odor free characteristics of Epoxy 151 provides safe application
and high performance.
Finish floor thickness can be applied from 1/8 inch to 1/4 inch
with our selected graded aggregate. Deeper areas can
be economically filled with heavier aggregate loading or our P-20
Polymer Cement.
EPOXY 151 has the unique ability to be insensitive to moisture
during installation. This allows application to proceed
on new concrete that has cured for as little as seven days or in
industrial plants with constant washdown procedures.
Many industrial projects can be completed in one day since this
self priming resin system can be installed and
finished in one application.
EPOXY 151 has excellent adhesion to concrete, wood
block and most metals. It’s great “flex” allows
applications
in areas of mechanical or thermal shock.
|
TYPICAL
PROPERTIES
Type...................................................
Two Part Epoxy
Solids by Weight................................ 100%
Compressive Strength (D-638-77a)... 9,500 p.s.i
Tensile Strength (D-790-71)... ............6,130 p.s.i.
Flexural Strength (D-790-71)... ..........10,130 p.s.i.
Abrasion Resistance (D-1044)..............0.0 gr.
Flammability (D-635)...........................Self-extinguishing
Color.........................................Clear, Grey,
red or Beige
Viscosity (Mixed resin at 75 D.F.).........600 cps
Pot Life at 70 D.F. ...............................35 to
50 min. |
RECOMMENDED FOR:
CONCRETE FLOOR TOPPING
INDUSTRIAL CONCRETE REPAIR
CHEMICAL CONTAINMENT LINER
SKID RESISITANT FLOORS
EXPANSION JOINT REPAIRS
SOME WOOD AND METAL APPLICATIONS |
EPOXY 151
Our original and best known system for industrial floors. It withstands
forklift and other plant equipment.
EPOXY 151SG
Epoxy 151 above with added chemical resistance.
Many industrial projects can be completed in one day since this
self priming resin system can be installed and
finished in one application.
EPOXY 151N
Has extreme corrosion resistance to most chemicals. The Epoxy Novalac
formulation is recommended for severe
chemical areas such as secondary containment and hazardous waste
storage.
Consult our chemical Resisitance chart for specific items.
BECOME THOROUGHLY FAMILIAR WITH PRODUCT HAZARDS BEFORE USING. CONSULT
MATERIAL SAFETY DATA SHEETS.
INSTALLATION PROCEDURE
1. New concrete shall be brought to complete cure
with no surface hardeners or curing agents.
2. Old concrete shall be cleaned and prepared.
..... Shotblast and/or diamond grinding
is a preferred method.
3. Mixing ratio is:
..... 2 Parts Resin A
..... 1 Part Hardener B
..... (by volume)
4. Resin and Hardener is to be mixed for 30 seconds
to one minute with a drill mixer.
5. Our selected aggregate is added and blended
in with the mixed resin (by weight).
6. The material is troweled in place, by a trained
applicator.
7. Cure Time at 70 DF:
..... 12 Hours foot traffic.
..... 24 Hours forklift traffic.
..... 4 days complete cure for maximum
chemical resistance.
PRECAUTIONS
WARNING. Severe skin and eye irritants. Use protective clothing,
gloves and face sheild, along with creams, during
mixing. Rinse off any material immediately. For further details,
refer to Material Safety Data Sheets. Clean up can be done with
toluene or xylene.
ADVANTAGES
1. Monolithic: Its elongation and bonding characteristics allows
installations over non-moving cracks.
2. Resistant to most chemicals - see our chemical resistant chart.
3. Approved for USDA installations
4. Virtually odorless.
DISADVANTAGES
1. Water Vapor transmission upward through on-grad concrete slabs
may result in loosening of epoxy bond.
MAINTENANCE Regular scrubbing with detergents and water flushing
is recommended for cleaning. If surface is stained, scratched or
damaged, a renewed surface can be attained with a roller coat of
our epoxy coating.
LIMITED WARRANTY
Epoxy Systems, LLC warrants to the original purchaser of its products
that such products are free from manufacturing defects. Our obligation
under this warranty is limited solely to the original purchaser
and to replace any product which may prove defective within one
year of installation. In no event is Epoxy Systems, LLC liable for
any consequential damages. |
|
